Bar Diameters
1.25 inches (31.8mm)
Boring Diameters
1.5-5 inches (38.1-127mm)
Bar Diameters
1.75 inches (44.5 mm)
1.25 inches (31.8 mm) optional
Boring Diameters
1.5–10 inches (38.1–254 mm)
Bar Diameters
2.25 inches (57.2 mm)
1.25 inches (31.8 mm) optional
Boring Diameters
1.5–24 inches (38.1–609.6 mm)
Bar Diameters
2.5 inches (63.5 mm)
1.875 inches (47.6 mm) optional
Boring Diameters
2.1–4.2 inches (53.3–106.7 mm)
Bar Diameters
3.5 inches (88.9 mm)
Boring Diameters
8.8–40.8 inches (223.5–1036.3 mm)
Bar Diameters
5 inches (127 mm)
Boring Diameters
10.25–58.25 inches
(260.4–1479.6 mm)
Bar Diameters
8 inches (203.2 mm)
Boring Diameters
17.1–85.1 inches
(434.3–2161.5 mm)
Axial Travel
9 inches (228.6 mm)
Wire Diameter Range
0.030–0.045 inches (0.76–1.14 mm)
Axial Travel
9 inches (228.6 mm)
Wire Diameter Range
0.030–0.045 inches (0.76–1.14 mm)
Axial Travel
6 or 12 inches (152.4 or 304.8 mm)
Wire Diameter Range
0.023–0.045 inches (0.58–1.14 mm)
Max. Turning Reach
12.5 inches (317.5 mm)
Shaft Diameters
1.5–9 inches (38.1–228.6 mm)
Max. Turning Reach
22 inches (558.8 mm)
Shaft Diameters
4–11.25 inches (101.6–285.8 mm)
Max. Turning Reach
27 inches (685.8 mm)
Shaft Diameters
4–11.25 inches (101.6–285.8 mm)
Valve Seat Diameters
2.5–10 inches (6.35–254.0 mm)
Valve Throat Diameters
3–10 inches (76.2–254 mm)
Seat Diameter Range
1.3–7.9 inches (32–200 mm)
Submerging Depth
17.7 inches (450 mm)
Seat Diameter Range
1.6–23.6 inches (40–600 mm)
Submerging Depth
39.4 inches (1000 mm)
Seat Diameter Range
7.9–39.4 inches (200–1000 mm)
Submerging Depth
55.1 inches (1400 mm)
Seat Diameter Range
0.4–6 inches (10–150 mm)
Submerging Depth
18 inches (450 mm)
Seat Diameter Range
3–20 inches (80–500 mm)
Submerging Depth
31 inches (800 mm)
KEY WAY MILLING
For about the same cost as machining a keyway off-site, you can purchase a CLIMAX Key Mill. These two-axis and three-axis mills cut keyways, slots, pockets, or flats on shaft diameters of 1.5 to 24 inches (38 to 610 mm). They can be operated in any position, thanks to their sealed gear box lubrication.
Keyway Length
6 inches (152.4 mm)
Keyway Width
1.25 inches (31.8 mm)
Keyway Length
8 inches (203.2 mm)
Keyway Width
3.25 inches with 2 inch sideshift
(82.6 mm with 50.8 mm sideshift)
CIRCULAR MILLING
ID Mounting Diameters:
For machining large flanges 73.5 – 199 inches (1866.9 – 5054.6 mm) in diameter, and featuring a center machine clearance designed to fit over 24 inch (609.6 mm) diameter kingpins, this Circular Mill can be configured for powerful milling, single-Point machining and grinding operations. Extraordinary rigidity, versatility, and power are at your fingertips – this machine can handle your toughest large flange machining jobs quickly and efficiently.78.9 – 177.2 inches (2004.1 – 4500.9 mm)
Milling Diameters:
73.5 – 199 inches (1866.9 – 5054.6 mm)
Min Turning Arm Swing Diameter:
135.6 inches (3444.2 mm)
Max Turning Arm Swing Diameter:
197 inches (5003.8 mm)
PLANO MILLING MACHINES
Max. X-Axis Travel
20, 49 or 78 inches (508.0, 1244.6 or 1981.2 mm)
Max. Y-Axis Travel
8 inches (203.2 mm) w/ Weldon
12 inches (304.8 mm) w/ HSK
Max. X-Axis Travel
84 inches (2133.6 mm)
Max. Y-Axis Travel
34 inches (863.6 mm)
Max. X-Axis Travel
176 inches (4470.4 mm)
Max. Y-Axis Travel
106 inches (2692.4 mm)
Cutting And Beveling
MAGNETIC DRILLING,TAPPING& BROACHING
- Drilling Machines
• BROACHING
• TAPPING
• REAMING
- Annular Cutters
- Other Drills
- Tapping
- Accessories
MIN. CAPACITY EQUIPMENT
ANNULAR CUTTERS | ø 12 - 30 mm | TWIST DRILLS | ø 1 - 13 mm |
LENGTH | 220mm | WIDTH | 170 mm |
HEIGHT | 293 - 383 mm | STROKE | 90 mm |
WEIGHT | 8,5 kg | MAGNET (L x W x H) | 160 x 80 x 37 mm |
MAGNETIC FORCE | 1200 kg | MOTOR POWER | 900 W |
TOTAL POWER | 950 W | SPEED (no load) | 775 min-1 |
SPEED (load 900 W) | 400 min-1 | SPINDLE | 19,05 mm Weldon |
VOLTAGE | 110 - 120 V / 50-60 Hz 220 - 240 V / 50-60 Hz |
MAX.CAPACITY EQUIPMENT
ANNULAR CUTTERS | ø 12 - 200 mm (mild steel) | TWIST DRILLS | ø up to 44 mm |
COUNTERSINKING | ø up to 205 mm | THREADING | n/a |
LENGTH | 480 mm | WIDTH | 260 mm |
HEIGHT | 660 - 840 mm | STROKE | 180 mm |
WEIGHT | 53 kg | MAGNET (L x W x H) | 330 x 110 mm |
MAGNETIC FORCE | 3900 kg | MOTOR POWER | 3600 W |
TOTAL POWER | 3800 W | SPEED (no load) | (I) 410 min¯¹ (II)170 min¯¹ |
SPEED (load 3600W) | (I) 150 min¯¹ (II) 70 min¯¹ |
SPINDLE | MT4 31,75 Weldon |
VOLTAGE | 110/220V / 50-60 Hz |